SurfaceRain
SurfaceRain is a ready to install, modular system designed to capture, filter and divert pure rainwater from roadside or plain surface to upper layers of aquifer through unique three stages of filtration including 'Non clogging SS V wire technology for filtration'. This is designed to filter higher volume and flow of surface runoff and is flexible enough to fit on roadside, backyard etc.
Advantages of SurfaceRain
Features of SurfaceRain
Successful Installations
SurfaceRain FAQ's
Mini Injection well is ready to use surface filtration and recharge system that captures rainwater falling on surface catchment.
Mini Injection well captures water from plain surface, storm channel etc. Surface rainwater flows through three stages of filtration by gravity and passes through Balloon, three filter arrays i.e. gravels, activated carbon, charcoal, coarse sand and non-clogging SS 304 filter element and flows to the recharge bore well.
Inlet: 150 mm (6”), Outlet: 150 mm (6”), Over flow Drain outlet: 150 mm (6”).
Air vents : 1). 63 mm and 2). 32 mm.
Over flow allows draining of excess water.
It depends on type of surface catchment and geology. Generally one Mini Injection well can cover approximately 1000 Sq. Meters to 1500 Sq. Mtrs of surface area.
Filter element is of 500 Micron. Filter element is made out of SS 304 material.
It’s easy. One can take out balloon, empty it, wash it and wash to filter media, SS filter element under a running tap and place it back.
Mini Injection well is ready to use system made out of round precast modules.
Mini Injection well has 3 ft dia and 8 ft Depth that can be extended up to 12 ft.
